Tall Filler Spout for Embalming Machine
The tall faucet is designed for your embalming machine to fit under the spout. By using the master mixing valve, you can supply the desired temperature to the tank of your machine. The spout is easily turned out of the way when not in use.
A serrated attachment is provided for quick connection of rinse hose. A constant flow of water can be supplied to the embalming table for cleaning or procedure purpose. The rinse is vacuum breaker protected for backflow prevention. Rinse Hose included.
Master Mixing Valves
Water temperature to the table rinse and tall faucet are easily controlled with the master mixing valves. Simply adjust lever until the desired temperature is archived.
A hydro-aspirator with built-in vacuum breaker prevents contamination of your water supply. The clear sight drain also prevents contamination since the air gap will not allow aspirated material back into the aspirator assembly. A valve is provided to control water supply to the aspirator assembly. Included 10 ft./3 m. aspirator hose & 5 in./12 cm. draw hose.
The entire unit is pre-assembled and pre plumbed for easy installation. Simply drop into the cutout in your countertop and connect the utility lines. The base plate is fabricated of heavy gauge stainless steel. Will install incounters as shallow as 18 in./45 cm. deep.